The GSV-6T3 CAN/SubD44HD measuring amplifier is a 3-channel strain gauge amplifier with a CAN interface and USB-C port.
Sensors with full-bridge strain gauges, e.g., K3D and K3A, are connected via the front-panel 44-pin SubD44HD connector.
An M12 socket and an M12 plug are available on the rear panel for connecting the CAN bus cable.
The GSV-6T3 CAN/SubD44HD measuring amplifier is supplied with 10 V DC to 28 V DC via the CAN bus line. Alternatively, the GSV-6T3 CAN/SubD44HD can be supplied with via the USB-C interface.
Measurement data can be recorded both via the integrated USB-C port and via the CAN bus using the GSVmulti software. The GSVmulti software allows reading, recording, and visualizing measurement data via the CAN bus using a "PCAN-USB" converter.
Channel 3 can also be configured for the connection of a PT1000 temperature sensor via a jumper in the connector.
The GSV-6T3 CAN/SubD44HD measuring amplifier is factory-configured for connection to quarter-bridge strain gauges with 120 ohms, 350 ohms, or 1 kOhms in three-wire technology.
