The GSV-6T3 CAN/M12 measuring amplifier is a 3-channel measuring amplifier for strain gauges with a CAN interface and USB-C port.
Sensors with full-bridge strain gauges are connected via the 5-pin M12 sockets on the front.
An M12 socket and an M12 plug are available on the back for connecting the CAN bus line.
The GSV-6T3 CAN/M12 measuring amplifier is supplied with 10 V DC to 28 V DC via the CAN bus line. Alternatively, the GSV-6T3 CAN/M12 can be supplied with 5 V DC via the USB-C interface.
Measurement data can be recorded both via the integrated USB-C port and via the CANbus using the GSVmulti software. The GSVmulti software allows measurement data to be read, recorded and visualized via the CANbus using a “PCAN-USB” converter.
Pin 5 of the M12 circular connector is configured by default for connecting active sensors with a voltage output. Pin 5 of channel 3 can also be configured at the factory for connecting a PT1000 temperature sensor.
The measuring amplifier GSV-6T3 CAN/M12 is factory-configurable for the connection of strain gauge quarter bridges 120 Ohm, 350 Ohm or 1kOhm in three-wire technology.
