Measuring amplifier in aluminum housing (IP54) for sensors with straingages. Limiting frequency 1250Hz, input sensitivity 2 / 3,5 / 10 mV/V.

Analogue measuring amplifier in plug housing for sensors with strain gauges. Analogue output configurable, TEDS, sampling frequency 10Hz ... 25kHz, input sensitivity configurable 0.1mV/V ... 8mV/V

Measuring amplifier in desktop-housing for sensors with straingages. Serial port RS232, USB port, analogue output -5V...+5V, limiting frequency 260Hz, input sensitivity 3.5mV/V.

6-axis force- torque sensor;
1kN/50Nm;
Ø 80mm x 50mm, 5m cable

8-channel measurement amplifier with USB, Analog Output, UART Port;

S-type beam force sensor, 500 mN, accuracy class 0,1%, 34mm x 10mm x 24mm, 2m cable

Cylindric load cell, 500 N, Accuracy class 0,5%;
Ø 40mm x 25mm, 3m cable

Cylindric load cell, 500 N, Accuracy class 0,5%;
Ø 40mm x 25mm, 3m cable

S-Form force sensor, 20kN, 80 mm x 100 mm x 30 mm

Strain gauges as PCB for sensors with strain gauges;
Ø 18mm x 4mm;
Analog output 0 ... 10V / 4 ... 20mA / 0 ... 5V

Strain gauges as PCB for sensors with strain gauges;
22mm x 11mm x 4mm;
Analog output 0 ... 10V / 4 ... 20mA / 0 ... 5V