Call Us

We are ready to help

Request a special version

Didn't find what you were looking for?
This field cannot be empty.
This field must be at least 3 characters long.

Files

Drag & Drop files here or click to browse

File format supported: (.pdf, .zip, .docx, .png, .jpg .xlsx, .xls, .csv, .txt) & Max Filesize: 25mb

Need to be uploaded up 1 to 3 files.
File format supported: (.pdf, .zip, .docx, .png, .jpg .xlsx, .xls, .csv, .txt) & Max Filesize: 25mb
Leave your details so we can contact you
This field cannot be empty.
This field must be at least 3 characters long.
This field cannot be empty.
Please enter a valid email address.
This field cannot be empty.
Please enter a valid phone number.
This field cannot be empty.
Server error. Try again later.
Thank you!
We will send you a confirmation email and will contact you soon.
Don't have account yet? Register
Back to shopping
Art.Nr.: 4705

GSV-3USBx2

  • 2 - channel straingauge amplifier in aluminum housing;
  • connection: plug connector;
  • dimensions: 126 mm x 85 mm x 25 mm;
  • 1x input for voltage: ± 10V;
  • input sensitivity: 3,5 mV/V;
  • interface: 1x USB port, 2x 5pol. circular connectors series 763;
  • limiting frequency: 1250 Hz;
  • supply voltage: 4,5 V...5.5 V DC;
  • resolution: 16 Bit;
  • weight: 204 g;
  • environmental protection: IP40;

Ideal for usage with acceleration sensors AS28 or sensors with semiconductor strain gages.
The high limiting frequency of 1250 Hz is suitable for the detection of static and dynamic signals from sensors with straingages.
The measuring amplifier GSV-3USB can be configured via ASCII commands or Windows ® DLL much commands are available.

Options:

  • one-channel-device
  • variant with 2 mV/V or 3.5 mV/V available
  • connection for potentiometric displacement transducer (0-4.2 volt) or active sensors (±10 Volt)
All details
Select variant:
Artikelbeschreibung
  • 2 - channel straingauge amplifier in aluminum housing;
  • connection: plug connector;
  • dimensions: 126 mm x 85 mm x 25 mm;
  • 1x input for voltage: ± 10V;
  • input sensitivity: 3,5 mV/V;
  • interface: 1x USB port, 2x 5pol. circular connectors series 763;
  • limiting frequency: 1250 Hz;
  • supply voltage: 4,5 V...5.5 V DC;
  • resolution: 16 Bit;
  • weight: 204 g;
  • environmental protection: IP40;

Ideal for usage with acceleration sensors AS28 or sensors with semiconductor strain gages.
The high limiting frequency of 1250 Hz is suitable for the detection of static and dynamic signals from sensors with straingages.
The measuring amplifier GSV-3USB can be configured via ASCII commands or Windows ® DLL much commands are available.

Options:

  • one-channel-device
  • variant with 2 mV/V or 3.5 mV/V available
  • connection for potentiometric displacement transducer (0-4.2 volt) or active sensors (±10 Volt)
Highlights
  • Powered via USB port

  • Sampling rate 10 kHz

  • Data rate 1...1000 Hz

  • straingage quarter, half, full bridges

  • Built-in bridge supplement 350 Ohm

  • Optionally also for displacement transducers

  • Comprehensive software support

  • Galvanic isolation to USB port

  • Optional for connection of torque sensors with incremental encoder

Product description

This measuring amplifier for sensors with wire strain gauges is equipped with a USB interface, while power is supplied via the USB port on the rear of the measuring amplifier.

The measuring amplifier is also available in a 2-channel version (GSV-3USBx2).

A 15-pole Sub-D socket is included for connecting sensors.

The dual-channel measuring amplifier features sensor connections via two round plug connectors.

Ideal for usage with acceleration sensors AS28 or sensors with semiconductor strain gages.

The high limiting frequency of 1250 Hz is suitable for the detection of static and dynamic signals from sensors with straingages.

The stand-out features include its high sampling rate of 10kHz and the high 16 bit resolution, as well as the exceptional command set provided to configure the measuring amplifier via ASCII control codes or a Windows DLL.

This measuring amplifier can also be configured via solder bridges when analysing straingage quarter bridges (e.g. 350 ohm) or for a power supply of ±10 V .

It can also be optionally supplied for connecting potentiometric displacement transducers or for power input of 4...20mA , as well as for incremental encoders.

Recommended products
LatestProducts
GSV-3USBx2
GSV-3USBx2.pdf
Artikelbeschreibung
  • 2 - channel straingauge amplifier in aluminum housing;
  • connection: plug connector;
  • dimensions: 126 mm x 85 mm x 25 mm;
  • 1x input for voltage: ± 10V;
  • input sensitivity: 3,5 mV/V;
  • interface: 1x USB port, 2x 5pol. circular connectors series 763;
  • limiting frequency: 1250 Hz;
  • supply voltage: 4,5 V...5.5 V DC;
  • resolution: 16 Bit;
  • weight: 204 g;
  • environmental protection: IP40;

Ideal for usage with acceleration sensors AS28 or sensors with semiconductor strain gages.
The high limiting frequency of 1250 Hz is suitable for the detection of static and dynamic signals from sensors with straingages.
The measuring amplifier GSV-3USB can be configured via ASCII commands or Windows ® DLL much commands are available.

Options:

  • one-channel-device
  • variant with 2 mV/V or 3.5 mV/V available
  • connection for potentiometric displacement transducer (0-4.2 volt) or active sensors (±10 Volt)
Highlights
  • Powered via USB port

  • Sampling rate 10 kHz

  • Data rate 1...1000 Hz

  • straingage quarter, half, full bridges

  • Built-in bridge supplement 350 Ohm

  • Optionally also for displacement transducers

  • Comprehensive software support

  • Galvanic isolation to USB port

  • Optional for connection of torque sensors with incremental encoder

Product description

This measuring amplifier for sensors with wire strain gauges is equipped with a USB interface, while power is supplied via the USB port on the rear of the measuring amplifier.

The measuring amplifier is also available in a 2-channel version (GSV-3USBx2).

A 15-pole Sub-D socket is included for connecting sensors.

The dual-channel measuring amplifier features sensor connections via two round plug connectors.

Ideal for usage with acceleration sensors AS28 or sensors with semiconductor strain gages.

The high limiting frequency of 1250 Hz is suitable for the detection of static and dynamic signals from sensors with straingages.

The stand-out features include its high sampling rate of 10kHz and the high 16 bit resolution, as well as the exceptional command set provided to configure the measuring amplifier via ASCII control codes or a Windows DLL.

This measuring amplifier can also be configured via solder bridges when analysing straingage quarter bridges (e.g. 350 ohm) or for a power supply of ±10 V .

It can also be optionally supplied for connecting potentiometric displacement transducers or for power input of 4...20mA , as well as for incremental encoders.

Recommended products
LatestProducts
GSV-3USBx2
GSV-3USBx2.pdf
GSV-3USBx2
bars-filter