development of housings, electronic circuits, sensors, ...
if motion is detected , camera takes 3 pictures; intervall is "refresh time";
motion detection is active again, when 3 pictures are made (after 3x refresh intervall);
set OP Mode: normal;
is working in OP Mode semi background as well, but takes every 2...3 minutes a picture, when screen lock is activated/deactivated;
is not working in background mode;
power consumption is very high compared with background mode;
Type EKMC needs power supply between 3V and 6V, current consumption is 170µA; price about 15€
Type EKMB needs power supply between 2,3V and. 4.0V, current consumption is 6µA; price about 30€
i selected EKMC, because some smartphones need equal or more than 4.0V to detect a external power supply. EKMC may be supplied with 5V.
schedule of Prototype:
Samsung GT-S5830: needs 4.0 Volt trigger voltage
Samsung GT-S5360: needs 3.5 Volt trigger voltage
Google Nexus S: needs 3.5 Volt trigger voltage
Sony Xperia Ray: needs 3.9 Volt trigger voltage
LG Optimus L3: needs 3.9 Volt trigger voltage
ST2: Cut an old USB cable, and connect USB Cable at ST2;
ST3: Connect either 5V (best choice) or Li-Ion Battery;
ST1: connect a LED at ST1 if you want to control the function of the motion sensor;
ST4: Test pin; connect LED flash light for example...
Some modules need 5V but have long range like 5 m...10m.
Other modules run from 4 V (LiPo cell) but have ca 2 m range.
So a compromise should be met
i know, the Panasonic PIR Sensors are not the cheapest.
I tried out Sensors from Hygrosens. But they are not as fail-safe as Panasonic. And they need 6mA and more...
Panasonic even offers with 6µA current consumtion.
this device is a "USB cable" and is permanently charging your telefone and works as motion detector:
http://www.me-systeme.de/catalog/pir-se ... p-851.html
More informations here: hardware-f17/usb-pir-cable-motion-sensor-t176.html#p455
with this device you need to modify your phone: remove the battery and connect the device and a battery with high capacity:
More informations here: hardware-f17/osc-printed-circuit-t148.html
Complete cameras with housing, device tc-v1.0, battery, PIR sensor and smartphone:
Wer ist online?
Mitglieder in diesem Forum: 0 Mitglieder und 1 Gast