Transducer Strain gauge; dimensions: 5.0mm x 3.6mm, GL: 1,60mm, TC: Aluminium, 350 Ohm;

Starter-kit-basic Set includes all materials necessary to immediately start making strain gage installations.

6-channel strain gauge amplifier and datalogger with Bluetooth 4.0 interface. Configurable inputs for sensors with strain gauges, temperature sensor, voltage input 0-10V and incremental sensors.

4x30ml Silicone rubber, transparent;
air-drying solvent-thinned (Naphtha) Silicone rubber;
temperature Range: -60° bis +290°C.

Calotte for sensor KM38

Assembling the connector to sensor cable;
Connector Type SubD, 37 pin, male (male), with hood

Assembling the connector to sensor cable;
Connector Type SubD15HD, 15 pin, male, with hood, terminated on connecting cable / sensor, Connections for 6-wire technology bridged, including TEDS, undescribed

Mobile datalogger with display;
aluminium housing with keypad, SD-card slot, USB-Port, 0Hz ...3750Hz measurements

Universal general-purpose strain gages, dimensions: 23.5mm x 7.6mm, GL: 12.7mm, TC: steel

4-channel strain gauge amplifier with USB port with configurable input for strain gauges, temperature sensors, active sensors, displacement sensors and other sensors. Sensor connection via 4 pcs M12 Circular Connectors .

Strain Sensor, 350 Ohm, 26mm x 40mm x 10mm, mounting with screws M6x25; Straingage-Type FAE4-10S

4x30ml Polyurethane ,transparent;
for lab use, and as base coating for field applications;
Air-drying solvent-thinned (Xylene) Polyurethane.

10 pieces Polyester-Cellulose-Nonwoven soaked in Isopropyl Alcohol.;

Mounting plates for GSV-3USB / GSV-3USBx2 / GSV-1A4 / GSV-4USB

Analogue measuring amplifier in plug housing for sensors with strain gauges. Analogue output configurable, TEDS, sampling frequency 1Hz ... 25kHz, input sensitivity configurable 0.1mV/V ... 8mV/V

resistance: 350 Ohm, 0.1%, TK5, 0207 THT

Role with 3m x 70 mm;
rubber polymer without cover

Swabs, head cotton, handle paper;
dual round head, quantity: 1250

Mixing nozzles for double cartridge 50g M-Bond-30 and M-Bond-31;
package of 10;

Masking tape for strain gages with aluminum foil;

Measuring amplifier as an PCB for sensors with straingages. Serial Port RS232, RS422, analogue output -5V...+5V, limiting frequency 250Hz, input sensitivity from 2mV/V.

4-channel strain measurement amplifier with USB port with configurable input for strain gauges, temperature sensors, active sensors, displacement sensors and other sensors. Sensor connection via 1 piece Sub D37 connector