MESC-4x005-PVC xm
Sensor cable, 4-pin, 4x0.05mm², outer diameter 2.2 mm, PVC
TSE-397C
Silicone rubber adhesive and sealant;
transparent, high viskosity, 82.8ml
- delivery time 3-6 weeks
MESC-4x014-PUR xm
Sensor cable, 4-pin, 4x0.14mm², outer diameter 3.1 mm, PUR
Prosat PS-850 VPE50
cleaning wipes prosat meltblown polypropylene;
M-Bond-200 Kit
Kit consisting of Cyanoacrylate, Catalyst,
adhesive for short term applications, stress analysis and installation on site,
temperature range -32°C ... +65°C;
STC-36T-4 xm
Sensor cable, 4-pin, 4 x 0.0127 mm2, outer diameter 1.16mm, PFA
GSV-6CPU
analog amplifier pcb for sensors with strain gauges. Analog output configurable; sampling frequency is 1Hz ... 25kHz, measurement data rate (digital) 1...800/s x 6, input sensitivity adjustable 0.1 mV/V ... 8 mV/V
Rosin-Solvent 100ml (67/33)
100ml Flux-remover, 66% Isopropyl alcohol;
HUBY-340-CA002 Pack100
Swabs, head cotton, handle paper;
dual round head, quantity: 100
STC-32T-12 xm
Sensor cable, 12-pin, 12x0.032 mm2, od 2.53 mm, PFA
M-Bond-600
Two-component, solvent-thinned, Epoxy-phenolic adhesive for DMS-Application.
Widest operating temperature range: -269° to +370°C.
- delivery time please enquire, currently long delivery time!
Neutralisator-MN5A-1
Mild lye to surface preparation in conjuction with in activator. Bottle 60ml.;
Aktivator-MCA-1
Mild acid to surface preparation on metals, plastic and glass. Bottle 60ml.;
S-Sn60Pb39Cu1 100g
Cored S-Sn60Pb39Cu1;
100g coil, Ø 0.5
M-Coat-A
1x30ml Polyurethane ,transparent;
for lab use and as base coating for field applications;
Air-drying solvent-thinned (Xylene) Polyurethane.
M-Bond-610
Two-component, solvent-thinned, Epoxy-phenolic adhesive;
Widest operating temperature range: -269° to +370°C.
- delivery time please enquire, currently long delivery time!
GSV-6L
analog amplifier pcb for sensors with strain gauges. Analog output configurable; sampling frequency is 1Hz ... 25kHz, input sensitivity adjustable 0.1 mV / V ... 8 mV / V
MESC-4x0014-PUR xm
Sensor cable, 4-pin, 4x0.014mm², outer diameter 1.4 mm, PUR
CEA-06-125USA-350 Pack5
Shear stress strain gage; dimensions: 12,2mm x 10,2mm, GL: 3,2mm, TC: Steel, 4x45°;
STC-36T-3 xm
Sensor cable, 3-pin, 3 x 0.0127 mm2, outer diameter 1.08 mm, PFA
LSP-BCM-40 120
Printed Circuit Board 40mm x 40mm with bridge-completion for quarter bridge. 3 pieces 120 Ohm, 0,1%, TK25;
M-Flux-AR-2
1x 30ml Activated Rosin Soldering Flux AR, Rosin-Flux;
Fluoropolymer release film
The Teflon Foil is suitable for cold curing and hot curing strain gage bonding. The foil prevents other material except the strain gage from bonding to the component, 100 mm x 60 mm x 0,05 mm,
the package contains 10 sheets;
K-216-06-2434
Transducer strain gage; dimensions: 10,4mm x 9,1mm, GL: 2,36mm, TC: Steel , with lead wire 30mm;
M-Coat-D
1x30ml Acrylic paint, white;
air-drying Acrylic paint with Toluene-thinner;