Die Suche ergab 263 Treffer
- Sa 26. Mai 2018, 09:43
- Forum: Grundlagen
- Thema: Umrechnung der Messwerte KD80s 5kN mit GSV-3 Labvie
- Antworten: 3
- Zugriffe: 8816
Re: Umrechnung der Messwerte KD80s 5kN mit GSV-3 Labvie
Hallo Hans Henning, eine Anzeige von 2,018 mV/V entspricht 2,018/1,7655*5kN = 5,715 kN Entgweder der Sensor ist überlastet, oder nicht richtig angeschlossen, oder es muss einfach ein Nullabgleich mit dem GSv-3USB durchgeführt werden. Evtl einmal Defaulteinstellungen laden. https://me-systeme.de/docs...
- Mi 23. Mai 2018, 07:17
- Forum: Grundlagen
- Thema: Umrechnung der Messwerte KD80s 5kN mit GSV-3 Labvie
- Antworten: 3
- Zugriffe: 8816
Re: Umrechnung der Messwerte KD80s 5kN mit GSV-3 Labvie
Hallo HannsHenning, für die Skalierung sind Kennwert und Nennlast des Sensors (5kN, 1,7655 mV/V)wichtig, und der maximale Messbereich des GSV-3USB (Eingangsempfindlichkeit, 2 mV/V). Aus diesen 3 Größen errechnet sich ein Skalierungsfaktor: Skalierungsfaktor = 2 mV/V / 1,7655 mV/V * 5kN = 5,6641 kN. ...
- Do 10. Mai 2018, 06:30
- Forum: Software
- Thema: [C] GSV-2AS VC++ issue
- Antworten: 3
- Zugriffe: 8782
Re: [C] GSV-2AS VC++ issue
Hello Aclabo
to get only one value on demand, you must configure the device into "logger -Mode". Then you can produce one value with getvalue and read this value with getvalue
Best regards
Holger
to get only one value on demand, you must configure the device into "logger -Mode". Then you can produce one value with getvalue and read this value with getvalue
Best regards
Holger
- Sa 28. Apr 2018, 08:08
- Forum: Software
- Thema: [C] GSV-2AS VC++ issue
- Antworten: 3
- Zugriffe: 8782
Re: [C] GSV-2AS VC++ issue
Hello Aclabo, my first idea is, that there is no value ready to read, because GSV-2 device is configured in "logger" mode. In this case you must use GSVgetvalue first, to create one value. You can check, wheather GSV-2 is in logger mode with GSVmulti or GSVcontrol. Or you load default sett...
- Fr 20. Apr 2018, 08:05
- Forum: Software
- Thema: GSV-1A8USB mit K6D und nidaqmx-python
- Antworten: 1
- Zugriffe: 5856
Re: GSV-1A8USB mit K6D und nidaqmx-python
Hallo Torsten, richtig: Kanäle Ai0 bis Ai5. konfiguriert als single ended (massebezogener Eingang, kein Differenzeingang) Konfiguriert werden die Eingänge als -10V bis 10V Eingang; Der Zusammenhang zwischen Eingang und Ausgangswert ist linear. Richtig: Der Vektor aus den 6 gemessenen Spannungen wird...
- Fr 9. Feb 2018, 15:37
- Forum: Software
- Thema: Deactivate unvanted channels of GSV-6Pi using GSVmulti
- Antworten: 10
- Zugriffe: 23932
Re: Deactivate unvanted channels of GSV-6Pi using GSVmulti
Hello Nithin, actually a firmware can be made only with special adapters. Best way is to use a new GSV-6CPU with firmware >=3.17. Attention please: The demo software and perhaps your software is propably written with 115200 baud and must be adapted. If you want, we can configure the new GSV-6CPU wit...
- Do 8. Feb 2018, 12:11
- Forum: Software
- Thema: Deactivate unvanted channels of GSV-6Pi using GSVmulti
- Antworten: 10
- Zugriffe: 23932
Re: Deactivate unvanted channels of GSV-6Pi using GSVmulti
Hello, yes, it is possible to deactivate channels. But firmware must be 3.14 (available since 2018) Even it is possible to change the output frames to another format: standard is 4 bytes long per channel, binary is two bytes per channel. With software gsvmulti there is a gui for all these settings, ...
- Di 30. Jan 2018, 13:03
- Forum: Sensoren
- Thema: Wert des Dehnungsmessstreifens driftet
- Antworten: 1
- Zugriffe: 6665
Re: Wert des Dehnungsmessstreifens driftet
hallo, es ist immer eine Frage der Größenordnung. Es gibt natürlich eine Drift durch die Eigenerwärmung des Messgitters ("Einschaltdrift). Dabei besteht ein Zusammenhang zwischen Gittergröße und Speisespannung. Faustregel: Bei einer Gitterlänge von 3mm kann man in der Regel ohne Probleme mit 5V...
- Di 30. Jan 2018, 12:51
- Forum: Analoge Messelektronik
- Thema: Einstellung des GSV-6K über clickR clackR
- Antworten: 1
- Zugriffe: 6749
Re: Einstellung des GSV-6K über clickR clackR
Hallo, Schritt 1: Einstellung 0,5 mV/V ist richtig. (man könnte auch 0.1 mV/V einstellen, dann bekommt man bei 0.5N schon 100% des Ausgangssignals) Ausgangstyp: 0...10V: ich würde niemals 0...10V einstellen, immer +-10V. Grund: negative Ausgangssignale werden abgeschnitten bei -0.5V. Offset: das ist...
- Di 2. Jan 2018, 11:48
- Forum: Dehnungsmessstreifen
- Thema: Literatur Dehnungsmessstreifen
- Antworten: 0
- Zugriffe: 5801
Literatur Dehnungsmessstreifen
http://www.springer.com/de/book/9783658136116 Keil, Stefan: Dehnungsmessstreifen. 2. Auflage, Springer Vieweg, Wiesbaden, 2017 http://www.springer.com/de/book/9783642486609 Rohrbach, Christof (Hrsg.): Handbuch für experimentelle Spannungsanalyse. VDI-verlag GmbH, Düsseldorf, 1989. http://www.springe...