Die Suche ergab 263 Treffer

von Kabelitz
Sa 26. Mai 2018, 09:43
Forum: Grundlagen
Thema: Umrechnung der Messwerte KD80s 5kN mit GSV-3 Labvie
Antworten: 3
Zugriffe: 8596

Re: Umrechnung der Messwerte KD80s 5kN mit GSV-3 Labvie

Hallo Hans Henning, eine Anzeige von 2,018 mV/V entspricht 2,018/1,7655*5kN = 5,715 kN Entgweder der Sensor ist überlastet, oder nicht richtig angeschlossen, oder es muss einfach ein Nullabgleich mit dem GSv-3USB durchgeführt werden. Evtl einmal Defaulteinstellungen laden. https://me-systeme.de/docs...
von Kabelitz
Mi 23. Mai 2018, 07:17
Forum: Grundlagen
Thema: Umrechnung der Messwerte KD80s 5kN mit GSV-3 Labvie
Antworten: 3
Zugriffe: 8596

Re: Umrechnung der Messwerte KD80s 5kN mit GSV-3 Labvie

Hallo HannsHenning, für die Skalierung sind Kennwert und Nennlast des Sensors (5kN, 1,7655 mV/V)wichtig, und der maximale Messbereich des GSV-3USB (Eingangsempfindlichkeit, 2 mV/V). Aus diesen 3 Größen errechnet sich ein Skalierungsfaktor: Skalierungsfaktor = 2 mV/V / 1,7655 mV/V * 5kN = 5,6641 kN. ...
von Kabelitz
Do 10. Mai 2018, 06:30
Forum: Software
Thema: [C] GSV-2AS VC++ issue
Antworten: 3
Zugriffe: 8555

Re: [C] GSV-2AS VC++ issue

Hello Aclabo
to get only one value on demand, you must configure the device into "logger -Mode". Then you can produce one value with getvalue and read this value with getvalue
Best regards
Holger
von Kabelitz
Sa 28. Apr 2018, 08:08
Forum: Software
Thema: [C] GSV-2AS VC++ issue
Antworten: 3
Zugriffe: 8555

Re: [C] GSV-2AS VC++ issue

Hello Aclabo, my first idea is, that there is no value ready to read, because GSV-2 device is configured in "logger" mode. In this case you must use GSVgetvalue first, to create one value. You can check, wheather GSV-2 is in logger mode with GSVmulti or GSVcontrol. Or you load default sett...
von Kabelitz
Fr 20. Apr 2018, 08:05
Forum: Software
Thema: GSV-1A8USB mit K6D und nidaqmx-python
Antworten: 1
Zugriffe: 5726

Re: GSV-1A8USB mit K6D und nidaqmx-python

Hallo Torsten, richtig: Kanäle Ai0 bis Ai5. konfiguriert als single ended (massebezogener Eingang, kein Differenzeingang) Konfiguriert werden die Eingänge als -10V bis 10V Eingang; Der Zusammenhang zwischen Eingang und Ausgangswert ist linear. Richtig: Der Vektor aus den 6 gemessenen Spannungen wird...
von Kabelitz
Fr 9. Feb 2018, 15:37
Forum: Software
Thema: Deactivate unvanted channels of GSV-6Pi using GSVmulti
Antworten: 10
Zugriffe: 23004

Re: Deactivate unvanted channels of GSV-6Pi using GSVmulti

Hello Nithin, actually a firmware can be made only with special adapters. Best way is to use a new GSV-6CPU with firmware >=3.17. Attention please: The demo software and perhaps your software is propably written with 115200 baud and must be adapted. If you want, we can configure the new GSV-6CPU wit...
von Kabelitz
Do 8. Feb 2018, 12:11
Forum: Software
Thema: Deactivate unvanted channels of GSV-6Pi using GSVmulti
Antworten: 10
Zugriffe: 23004

Re: Deactivate unvanted channels of GSV-6Pi using GSVmulti

Hello, yes, it is possible to deactivate channels. But firmware must be 3.14 (available since 2018) Even it is possible to change the output frames to another format: standard is 4 bytes long per channel, binary is two bytes per channel. With software gsvmulti there is a gui for all these settings, ...
von Kabelitz
Di 30. Jan 2018, 13:03
Forum: Sensoren
Thema: Wert des Dehnungsmessstreifens driftet
Antworten: 1
Zugriffe: 6513

Re: Wert des Dehnungsmessstreifens driftet

hallo, es ist immer eine Frage der Größenordnung. Es gibt natürlich eine Drift durch die Eigenerwärmung des Messgitters ("Einschaltdrift). Dabei besteht ein Zusammenhang zwischen Gittergröße und Speisespannung. Faustregel: Bei einer Gitterlänge von 3mm kann man in der Regel ohne Probleme mit 5V...
von Kabelitz
Di 30. Jan 2018, 12:51
Forum: Analoge Messelektronik
Thema: Einstellung des GSV-6K über clickR clackR
Antworten: 1
Zugriffe: 6614

Re: Einstellung des GSV-6K über clickR clackR

Hallo, Schritt 1: Einstellung 0,5 mV/V ist richtig. (man könnte auch 0.1 mV/V einstellen, dann bekommt man bei 0.5N schon 100% des Ausgangssignals) Ausgangstyp: 0...10V: ich würde niemals 0...10V einstellen, immer +-10V. Grund: negative Ausgangssignale werden abgeschnitten bei -0.5V. Offset: das ist...
von Kabelitz
Di 2. Jan 2018, 11:48
Forum: Dehnungsmessstreifen
Thema: Literatur Dehnungsmessstreifen
Antworten: 0
Zugriffe: 5682

Literatur Dehnungsmessstreifen

http://www.springer.com/de/book/9783658136116 Keil, Stefan: Dehnungsmessstreifen. 2. Auflage, Springer Vieweg, Wiesbaden, 2017 http://www.springer.com/de/book/9783642486609 Rohrbach, Christof (Hrsg.): Handbuch für experimentelle Spannungsanalyse. VDI-verlag GmbH, Düsseldorf, 1989. http://www.springe...

Zur erweiterten Suche